LoboVault Home
 

Room temperature and cryogenic Yb:YAG thin disk laser : single crystal and ceramic

LoboVault

Please use this identifier to cite or link to this item: http://hdl.handle.net/1928/17511

Room temperature and cryogenic Yb:YAG thin disk laser : single crystal and ceramic

Show simple item record

dc.contributor.author Vretenar, Natasa
dc.date.accessioned 2012-02-01T18:41:44Z
dc.date.available 2012-02-01T18:41:44Z
dc.date.issued 2012-02-01
dc.date.submitted December 2011
dc.identifier.uri http://hdl.handle.net/1928/17511
dc.description.abstract The focus of this dissertation is to design, optimize and build an efficient high power multi kilowatt thin-disk laser system. We improve the thin-disk beam quality by eliminating thermally induced lensing and disk bowing. The characteristics and performance of a ceramic and single crystal Yb:YAG thin disk (TD) lasers are analyzed both experimentally and theoretically. We perform these experiments at room and at cryogenic temperatures. Novel composite substrate materials are explored for thermal management. Thermal and stress computations are modeled in detail using the finite element analysis COMSOL software. Geometrical and physical optics models, employing ZEMAX and other numerical techniques, are used to evaluate beam quality. Theoretical modeling results are combined to further explain physical mechanisms that influence a high power output laser beam. An analytical amplified spontaneous emission (ASE) model in thin-disk laser is developed. Experimental data includes: thermal measurements of thin-disk and output couplers; small signal gain; wavefront; spectrum; lifetime and fluorescence measurements. Most importantly, for the first time, thin-disk laser performance at room and cryogenic temperatures using a novel two phase boiling cooling system is investigated. Our unique setup allows us to directly compare the same material performance at these two temperatures. Our cryogenic results show that operating the laser as a four level system could be the key in achieving very high output power with less complicated system since there is a higher cross-section, and a fewer number of pump bounces is required. Thin-disks for cryogenic operation do not have to be as thin, which also makes it easier to manufacture them. Techniques developed in these experiments are of fundamental importance in future work related to high power solid state lasers; material science, particularly ceramic lasers, and composite materials manufacturing; and cryogenic operation lasers. A thorough and detailed design of a high power thin-disk laser supported by experimental data is presented. en_US
dc.subject thin disk laser material science en_US
dc.subject.lcsh High power lasers.
dc.subject.lcsh Rare-earth lasers.
dc.subject.lcsh Solid state lasers.
dc.title Room temperature and cryogenic Yb:YAG thin disk laser : single crystal and ceramic en_US
dc.type Dissertation en_US
dc.description.degree Optical Science and Engineering en_US
dc.description.level Doctoral en_US
dc.description.department University of New Mexico. Dept. of Electrical and Computer Engineering en_US
dc.description.advisor Balakrishnan, Ganesh
dc.description.committee-member Newell, Tim
dc.description.committee-member Lester, Luke
dc.description.committee-member Krishna, Sanjay
dc.description.committee-member Malloy, Kevin


Files in this item

Files Size Format View
NVdissertation.pdf 28.46Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record

UNM Libraries

Search LoboVault


Advanced Search

Browse

My Account