LoboVault Home
 

Fabrication and characterization of synthetic substrates for use in rigidity cell culture studies of valvular interstitial cells for aortic valve tissue engineering

LoboVault

Please use this identifier to cite or link to this item: http://hdl.handle.net/1928/17440

Fabrication and characterization of synthetic substrates for use in rigidity cell culture studies of valvular interstitial cells for aortic valve tissue engineering

Show simple item record

dc.contributor.author Leonard, Alexander T.
dc.date.accessioned 2012-02-01T17:23:38Z
dc.date.available 2012-02-01T17:23:38Z
dc.date.issued 2012-02-01
dc.date.submitted December 2011
dc.identifier.uri http://hdl.handle.net/1928/17440
dc.description.abstract More than 100,000 Americans each year undergo aortic valve (AV) replacement due to valve failure. An AV can become diseased, impairing the proper function of the valve. Common treatments for a defective valve are either replacement with a decellularized biologic or a synthetic valve. These treatments options are limited by short functional lifetime and thrombogenic surfaces. Tissue engineered heart valve will have the ability to integrate with the surrounding tissue as well as to repair and remodel. However, a greater understanding of valve cell biology is required to induce analogous tissue formation. A diseased valve is associated with stiffening of the tissue. Researchers have probed the impact of stiffness on cell function, but have had results complicated by in vitro models used. The synthetic materials commonly used to fabricate cell culture platforms with varied moduli are limited in applicability due to a restricted range of achievable moduli and/or surface instabilities. The copolymer network n-octyl methacrylate (nOM) and diethylene glycol dimethacrylate (DEGDMA) offers attractive material properties that overcome these limitations. We have fabricated co-polymer networks with 3 to 33 wt% DEGDMA with bulk compressive modulus of 25±2 to 4700±300 kPa. Nanoindentation determined cellular level mechanics of the nOM / DEGDMA ranged from 6.5 ± 0.00 to 1,562.5 ± 192 MPa. The networks demonstrated consistent surface properties of wettability/hydrophobicity, chemical composition and topography. The nOM/DEGDMA substrates vary in modulus over three orders of magnitude while maintaining comparable chemical and topographical surface features. The primary cells of the AV, valvular interstitial cells (VICs), were cultured on the nOM/DEGDMA substrates. It was found that the rate of proliferation was not impacted by the stiffness of the culture platform. Expression levels of phenotypic markers for the active and osteoblastic-like were not affected by the stiffness of the substrates. Production of collagen-I and sulfated glycosaminoglycans did not change between the different substrate moduli. However, elastin production was significantly upregulated on the softest materials. We have fabricated a cell culture platform that is capable of varying over a three orders of magnitude of a physiologically relevant range, and used it to study the changes of VIC functions. en_US
dc.description.sponsorship Partnerships for Research and Education in Materials (PREM) grant #DMR 0611616 National Science Foundation and University of New Mexico Research Allocations Committee #11-L-01 en_US
dc.language.iso en en_US
dc.subject Extracellular matrix; Tissue Engineering; Cardiac valve; Valvular interstitial cell; Rigidity en_US
dc.subject.lcsh Tissue scaffolds.
dc.subject.lcsh Heart valve prosthesis.
dc.subject.lcsh Aortic valve.
dc.subject.lcsh Tissue engineering.
dc.title Fabrication and characterization of synthetic substrates for use in rigidity cell culture studies of valvular interstitial cells for aortic valve tissue engineering en_US
dc.type Thesis en_US
dc.description.degree Chemical Engineering en_US
dc.description.level Masters en_US
dc.description.department University of New Mexico. Dept. of Chemical and Nuclear Engineering en_US
dc.description.advisor Dirk, Elizabeth
dc.description.committee-member Canavan, Heather
dc.description.committee-member Graves, Steven


Files in this item

Files Size Format View Description
AlexLeonard_MasterThesis.pdf 1.997Mb PDF View/Open Alex Leonard Thesis

This item appears in the following Collection(s)

Show simple item record

UNM Libraries

Search LoboVault


Advanced Search

Browse

My Account