LoboVault Home
 

Synthesis and nano-mechanical characterization of calcium silicate hydrate (C-S-H)

LoboVault

Please use this identifier to cite or link to this item: http://hdl.handle.net/1928/13086

Synthesis and nano-mechanical characterization of calcium silicate hydrate (C-S-H)

Show full item record

Title: Synthesis and nano-mechanical characterization of calcium silicate hydrate (C-S-H)
Author: Foley, Emilia
Advisor(s): Taha, Mahmoud
Committee Member(s): Maji, Arup
Juenger, Maria
Taha, Mahmoud
Department: University of New Mexico. Dept. of Civil Engineering
Subject(s): nanoindentation, C-S-H
LC Subject(s): Calcium silicates--Mechanical properties.
Hydrates.
Cement.
Degree Level: Masters
Abstract: Calcium Silicate Hydrate (C-S-H) constitutes two-thirds of hydrated cement paste by volume. Having a better understanding of the mechanical properties of C-S-H will significantly aid in future effort for making ’concrete by design’ for specific applications such as blast resistance. C-S-H is an amorphous compound whose chemical structure has been debated by researchers for years. It has been found that C-S-H can form with a wide variety of calcium to silicate (C/S) ratios, and it is the intent of this thesis to determine the effect of the C/S ratio on mechanical properties, most specifically elastic modulus of C-S-H. By varying the calcium and silicate ratios as well as the density of the material, relationships can be formulated between these properties and the mechanical properties of the material. As C-S-H is an amorphous substance, its chemical composition can vary widely depending on the ratio of the raw materials mixed and the water-cement ratio. Here, C-S-H is synthesized at room temperature and atmospheric pressure by producing calcium oxide (CaO) using calcium carbonate and then mixing it with fumed silica (SiO2) and enough deionized water to make slurry. The slurry was continuously mixed for 7 days, after which the excess water was removed. C/S ratios of 1.5, 1.2, and 0.9 were synthesized. In addition, C-S-H with a C/S ratio of 1.5 was synthesized under high temperature (80◦C) and pressure (10 MPa, 98.7 atm). The resultant C-S-H was dried to a set water level using two standard techniques known as D-drying and equilibration to 11% relative humidity (RH). The C-S-H was then chemically and mechanically characterized. The dried powders were characterized using thermogravimetric analysis (TGA), x-ray diffraction analysis (XRDA), and 29Si magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy. The characterization confirmed the formation of C-S-H with high purity. It also identified the level of silicate polymerization and its correlation to the stiffness of C-S-H. The powders were then compacted to create specimens with porosities similar to C-S-H in cement. The specimens underwent nanoindentation experiments to mechanically characterize C-S-H. These experiments provide insight on the nanoscale mechanical characteristics of C-S-H. We then try to establish some links between the C-S-H composition and its mechanical properties.
Graduation Date: July 2011
URI: http://hdl.handle.net/1928/13086

Files in this item

Files Size Format View Description
efoley thesis 6-27-11.pdf 6.888Mb PDF View/Open Thesis

This item appears in the following Collection(s)

Show full item record

UNM Libraries

Search LoboVault


Advanced Search

Browse

My Account