LoboVault Home
 

Precision electron flow measurements in a disk transmission line

LoboVault

Please use this identifier to cite or link to this item: http://hdl.handle.net/1928/6765

Precision electron flow measurements in a disk transmission line

Show simple item record

dc.contributor.author Martin, Jeremy
dc.date.accessioned 2008-07-09T23:12:22Z
dc.date.available 2008-07-09T23:12:22Z
dc.date.issued 2008-07-09T23:12:22Z
dc.date.submitted May 2008
dc.identifier.uri http://hdl.handle.net/1928/6765
dc.description.abstract In large z-pinch drivers, it is ideal to minimize the electron flow near the load while maintaining a low inductance as to not suffer a decrease in system efficiency. While inductance and electron flow are normally competing requirements, transmission lines with a spatially varying gap in the direction of power flow allow for an inductive profile to be built directly into the geometry of the electrodes. If the transit time of the transmission line is small compared to the pulse width of the forward wave, then the spatially varying electric and magnetic fields associated with the power pulse are capable of altering the distribution of the electron current in the direction of power flow. Some previous designs assumed that the field emitted electrons within the vacuum line were incapable of returning to the cathode surface, unable to reduce the electron flow, and thus determined an optimally uniform radial current. Recent experiments and simulations, however, suggest that the re-trapping of electrons is possible and could result in even lower inductive machines. An experimental study was devised to determine the feasibility of tailoring the radial profile of the electron current within a magnetically insulated transmission line with the intent of further reducing the overall inductance of the system. This was approached through the development of a theoretical model which exploits the possibility that electrons are capable of returning to the cathode surface through a continual gain in their total energy. The inductive profile was derived from the theoretical model's prediction of a radially reducing electron flow and built directly into the curvature of the transmission line's electrodes. This model was validated for strongly insulated electron flows, V > 5 MV, using particle-in-cell simulations which had been used extensively on the large z-pinch driver located at Sandia National Laboratories. Low voltage tests, V < 1 MV, were experimentally tested and provided a benchmark for the use of the PIC simulations to model marginally insulated electron flows. Experiments also allowed the development of a new diagnostic for measuring the electron current directly at the load. This would provide a unique method for studying strongly insulated flows which have historically been difficult to measure. en_US
dc.description.sponsorship Sandia National Laboratories en
dc.language.iso en_US en_US
dc.subject magnetic insulation en_US
dc.subject z-pinch en_US
dc.subject.lcsh Electric displacement--Measurement
dc.title Precision electron flow measurements in a disk transmission line en_US
dc.type Dissertation en_US
dc.description.degree Doctor of Engineering en
dc.description.level Doctoral en
dc.description.department University of New Mexico. Dept. of Electrical and Computer Engineering en
dc.description.advisor Gilmore, Mark
dc.description.committee-member Schamiloglu, Edl
dc.description.committee-member Cooper, Gary
dc.description.committee-member Savage, Mark


Files in this item

Files Size Format View
JPM Dissertation May 2008.pdf 3.396Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record

UNM Libraries

Search LoboVault


Advanced Search

Browse

My Account