LoboVault Home
 

Novel routes for synthesis of Pd nanoparticles and faceted ZnO supports for heterogeneous catalysts

LoboVault

Please use this identifier to cite or link to this item: http://hdl.handle.net/1928/13128

Novel routes for synthesis of Pd nanoparticles and faceted ZnO supports for heterogeneous catalysts

Show simple item record

dc.contributor.author Burton, Patrick David
dc.date.accessioned 2011-08-31T14:53:29Z
dc.date.available 2011-08-31T14:53:29Z
dc.date.issued 2011-08-31
dc.date.submitted July 2011
dc.identifier.uri http://hdl.handle.net/1928/13128
dc.description.abstract Alcohol steam reforming is a promising source of hydrogen as fuel, and could be improved by the use of an optimal catalyst. The methanol steam reforming reaction, CH3OH+H2O --> 3H2+CO2 frequently conducted by means of a Cu/ZnO catalyst. Unfortunately, this catalyst deactivates quickly and is pyrophoric. Pd catalysts are much more stable, but reactions using these catalyst follow the decomposition pathway, CH3OH --> 2H2+CO. PdZn alloys can achieve the desired selectivity, and have been noted to form under reaction conditions from Pd/ZnO heterogeneous catalysts. In the present work, careful synthesis techniques of specific support and nanoparticle surfaces have been developed to gain a better understanding of the interaction between each phase. Synthesis focused on preferential exposure of the most active surface of each material. In the case of ZnO, the polar facets of the crystallite were desirable. These high-energy surfaces are less commonly exposed than non-polar facets in typical powders. Tailored platelet shapes were produced in solution by restricting the growth along the (0001) direction, producing thin crystallites. The surfaces of these crystallites were primarily (0001) surfaces, and \emph{en masse} constituted a high surface area powder, ideal for use as a catalyst support. For the Pd nanoparticle phase, small particles are necessary for high activity. Synthetic techniques to produce nanoparticles typically use organic capping material, which was shown here to be detrimental to the overall activity. A simpler technique was developed in which methanol was used to reduce a Pd precursor in solution without capping agents. This method was effective when depositing Pd on carbon, and has been shown to be strongly dependent on surface chemistry when used with oxide supports. By manipulating the oxide surface with simple solvents, this technique has been generalized for the synthesis of supported nanoparticle catalysts. en_US
dc.description.sponsorship My research has been supported by the United States Department of Energy, Office of Basic Energy Sciences under contract number DE-FG02-05ER15712, and the Partnership for International Research and Education (PIRE) under the National Science Foundation, grant number OISE 0730277. The research conducted has been augmented by the electron microscopy facilities at the University of New Mexico which are supported by the NSF EPSCOR and NSF NNIN grants. en_US
dc.language.iso en_US en_US
dc.subject Pd,ZnO,nanoparticles,Methanol Steam Reforming,acetylene hydrogenation en_US
dc.title Novel routes for synthesis of Pd nanoparticles and faceted ZnO supports for heterogeneous catalysts en_US
dc.type Dissertation en_US
dc.description.degree Chemical Engineering en_US
dc.description.level Doctoral en_US
dc.description.department University of New Mexico. Dept. of Chemical and Nuclear Engineering en_US
dc.description.advisor Datye, Abhaya
dc.description.committee-member Boyle, Timothy J.
dc.description.committee-member Petsev, Dimiter
dc.description.committee-member Kemp, Richard


Files in this item

Files Size Format View
BurtonPhD-manuscript1.pdf 2.433Mb PDF View/Open

This item appears in the following Collection(s)

Show simple item record

UNM Libraries

Search LoboVault


Advanced Search

Browse

My Account